ファイル:Regenerative Receiver.png
ナビゲーションに移動
検索に移動
高解像度版はありません。
Regenerative_Receiver.png (776 × 522 ピクセル、ファイルサイズ: 12キロバイト、MIME タイプ: image/png)
|
この回路図の画像は、ベクターイメージである SVG ファイルとして再作成されるべきです。これにはいくつかの利点があります。詳しくはCommons:Media for cleanupを参照してください。この画像の SVG 形式がすでに利用可能である場合は、アップロードしてください。アップロード後、この画像にあるこのテンプレートを{{Vector version available|新しい画像ファイル名.svg}}テンプレートで置き換えてください。
|
Source
| 解説 |
English: Single tube Armstrong regenerative receiver circuit. The regenerative receiver was invented in 1912 by Edwin Armstrong and widely used until the superhetrodyne became popular in the 1930s. This circuit was widely used until the 1970s in do-it-yourself radio kits to teach people about radio technology. The advantage of the regenerative circuit is that it uses feedback to increase the gain of the amplifying triode tube so that a single tube provides enough amplification for the entire receiver. Second, the feedback also increases the selectivity (Q_factor) of the tuned circuit, increasing the ability of the receiver to reject nearby interfering signals. The "tickler coil" introduces a small amount of the output signal from the plate circuit of the tube into the grid tuned circuit by magnetic coupling, providing positive feedback. The amount of feedback is controlled by moving the tickler coil closer or further from the secondary. In AM reception, the feedback signal is not made large enough to cause the tube to break into oscillation, but only enough to increase the voltage gain greatly at the input frequency. The "grid leak" resistor and capacitor provide a DC bias for the tube grid. Since the tube must also function as a demodulator, rectifying the AC radio signal to extract the audio, the grid must be biased at "cutoff", a few volts negative with respect to the filament, so that it only conducts on the positive half-cycles of the radio wave. The "grid leak" generates this voltage from the tube itself. When the grid becomes positive on the positive swings of the input, electrons are attracted to it, causing a grid current. The grid leak capacitor stores this charge to bias the grid negative. The resistor partly discharges the capacitor during the negative half-cycles to control the size of the bias voltage. |
||
| 原典 |
Originally from en.wikipedia; description page is (was) here * 20:58, 4 January 2005 [[:en:User:Thbusch|Thbusch]] 776×522 (24,230 bytes) (Regenerative Receiver Circuit) |
||
| 作者 | User Thbusch on en.wikipedia | ||
| 許可 (ファイルの再利用) |
|
(Uploaded using CommonsHelper or PushForCommons)
ファイルの履歴
過去の版のファイルを表示するには、その版の日時をクリックしてください。
| 日時 | サムネイル | 寸法 | 利用者 | コメント | |
|---|---|---|---|---|---|
| 現在の版 | 2011年4月16日 (土) 20:24 | | 776 × 522 (12キロバイト) | wikimediacommons>Slim Pikkins | Missing wire junctions were a terrible eye strain. |
ファイルの使用状況
以下のページがこのファイルを使用しています:
